Homeowner guide

Garage doors in cold weather: springs, openers and sticking doors

Why garage doors act up in a New Hampshire winter, the safety checks you can do yourself, and the jobs (springs, cables, balance) that belong to a trained technician.

Reviewed 21 November 2026. Rules, rebates and programs change; check the sources below for the latest.

A garage door is the largest moving part in most homes, and cold weather is hard on it. Springs, rollers and openers all behave differently when it’s well below freezing. Here’s what tends to go wrong in winter, what you can safely check yourself, and what to leave to a trained technician.

Common cold-weather problems

  • Stiff or noisy movement. The International Door Association notes that cold can thicken or harden lubricants, and that metal parts contract, which can cause squeaking or misalignment.
  • A door that feels heavy or struggles. DASMA says a door that feels heavy, or needs two hands to lift, is probably out of balance, and the fix is an adjustment by a technician, not a more powerful opener.
  • A door frozen to the ground. Melting snow can refreeze along the bottom seal. Clopay advises against forcing the door open, because the opener or the seal can be damaged. Free it by carefully chipping away the ice or using warm water, then dry the area. Clopay also says not to use ice melt on the door itself, especially a metal one.
  • Broken springs. Clopay notes that spring wire gets more brittle in the cold. Springs wear out with use, so older springs on a door used every day are the most likely to break in winter.

Safety checks you can do yourself

DASMA, the industry association for door manufacturers, recommends monthly safety checks, and these are the main ones:

  • Test the auto-reverse. DASMA’s maintenance guide: lay a 2x4 flat in the door’s path and close the door. It should stop when it touches the board and reverse. Then block the photo-eye beam with an object and try to close the door; it shouldn’t close unless you hold the wall button down. If either test fails, contact a trained door technician.
  • Check the photo-eyes. The International Door Association says the sensors should sit five to six inches above the floor with nothing blocking them; DASMA says no higher than six inches. Keep them clear of snow and ice.
  • Look at the cables that run from the springs to the bottom brackets. Frayed or worn cables can break; DASMA says they should be replaced only by a trained technician.
  • Watch the door move. If it doesn’t go up and down smoothly, DASMA notes the spring system may be out of balance, which is a job for a professional.
  • Lubricate with the right product. DASMA suggests a spray lubricant made for garage doors on noisy springs and moving parts. If the noise keeps up, call a technician.

Keep your fingers out from between the door sections when you open or close the door by hand, and use the handles.

Leave these jobs to a technician

DASMA is clear that spring systems are dangerous and should be repaired only by trained professionals. Hand these jobs off:

  • Broken or worn springs. If your door has two springs, DASMA recommends replacing both, even when only one has broken.
  • Cables, bottom brackets and balance. These parts are under high spring tension.
  • Extension springs without a safety cable. DASMA says these need a safety cable running through each spring; if yours don’t have one, ask for a safety inspection.
  • Older openers without auto-reverse or photo-eyes. DASMA notes that openers made for the U.S. since 1993 must have a second safety-reversing feature such as photo-eyes, and that an opener without one should be replaced.

DASMA also recommends an annual visit from a trained door technician alongside your own monthly checks.

Who to call

Garage door companies install, repair and service doors, springs and openers. When you call, describe what the door is doing and when it started, and mention the door’s age and whether it has one spring or two.

More guides